Eco Log 580C Harvester (275 hp)
Technical specifications
| Specifications | |
|---|---|
| Length | 7190 mm |
| Height min/max | 3420/4700 mm |
| Width | 2910 mm |
| Ground clearance | 220-1250 mm |
| Weight | 18 500 kg |
| Engine | MB OM 906LA |
| Displacement | 6.4 L |
| Gross power @ 2200 rpm | 275 hp (205 kW) |
| Peak torque @ 1200-1600 rpm | 1100 Nm |
| Transmission, 3 gear | 6wd Hydrostatic |
| Tractive force, max | 170 kN |
| Tilt angle fore/aft | ± 15° |
| Tilt angle side to side | ± 25° |
| Reach, crane | 9,5-11,3 m |
| Gross lifting torque | 246 kNm |
| Gross slewing torque | 33 kNm |
| Slewing angle | 280° |
| Load sensing pressure compensated | |
| Flow | 252 l/m |
| Working pressure | 25 MPa |
| Working lights Xenon | 19 x 35 W |
| Harvester head | Log Max 4000/5000/6000 |
Download Data Sheet
The work horse Eco Log 580C combines brute performance with excellent comfort and is best suited for final felling or heavy thinning. New dual circuit hydraulics for crane and harvester head makes it possible to utilize full lifting torque and boom movements during the whole working cycle. The new 205 kW (275 hp) Mercedes Benz OM 906LA diesel delivers high power and high torque already at low rpm’s, providing good fuel economy and low total costs.
Eco Log 580C is powered by a Mercedes Benz OM 906LA engine which provides it with 205 kW (275 hp) and an unbeatable fuel efficiency. Because Eco Log machines are environmentally friendly, all machines fitted with Mercedes Benz engines can run with 100% FAME/RME bio-diesel.
The new Cabs of the C series are ergonomic, spacious and comfortable. All windows are made out of polycarbonate for maximum security and are approved according to ROPS/OPS/FOPS.
The side mounted crane rotates 280°, thus minimizing machine travel, leading to reduced ground impact and lower fuel consumption. The Eco Log 580C is very stable, allowing it to take full advantage of the 11.3 meter crane reach.
Eco Log 580C is, like all Eco Log Harvesters, equipped with CabsWin measuring and control system; a PC/Windows based CANbus system that follows the StanForD file-structure standard. The system integrates the Harvester Head’s control- and measuring system with the Harvester’s control system IQAN. All felling data are stored on the computer’s hard drive and the production results can be continuously monitored. If needed, data can at any time be transferred to a different location. GPS-positioning is standard and as an option Eco Log 580C can be equipped with Internet connection.